1 thought on “What are the inlay processes in diamond ring”
Allison
One: Rail inlaid is a mosaic method that places the gemstone in the front side of the car, put the gemstone in the position and suppresss firmly. This method is commonly used in high -end jewelry. Other squares and trapezoidal diamonds are inlaid to inlay it with excellent effects. The advantage of this style is that it has better protection on the waist of the diamond. At the same time, it can be inlaid with multiple diamonds and different stripped diamonds at the same time. The disadvantage is that the beauty of diamonds cannot be fully reflected, the cost is high, and diamond damage is likely to cause diamonds. This style is suitable for both male rings and women's rings. Two: This style of inlay is to inlaid the diamond into a string, and the diamond is inlaid in various holes on the ring, so that the diamond and the ring are almost on the same plane, often used for women's finger ring. The advantage of this style is that it can better protect diamonds than claws. In addition, this style makes most of the diamond exposure outside, which can produce a more visual effects that diamonds are actually larger or more. The disadvantage is that the danger of inlaid is high, because diamonds are easily damaged during the inlaid process. The degree of diamond fixation is not as good as the above styles, and the surface of the diamond ring is not as flat as the gap fate and Chaneer. This diamond inlaid process is suitable for diamonds with small scores. Three: Claw inlaid this is the most common and relatively simple process in the inlaid process. Claw inlaid is the method of clawing gemstones on the bracket with metal claws. The claws are divided into two types of single grains and group inlays. The single -granular inlaid is inlaid with a large gemstone on the bracket; In addition, this style of inlaid diamonds are also easy to clean. Because of the above advantages, the diamond ring with claws is favored by women. However, the diamond (especially above the pavilion) exposure is more exposed than other styles, so pay attention to the protection of diamonds when wearing. In addition, this style is sometimes easy to hook clothes, towels or hair, or harm others, and the wearer also needs to pay great attention. Four: Microclangeal is performed under a microscope. It is very rigorous and exquisite for craftsmanship. The process of Dger jewelry: The diamond is very small. The countertop is parallel to the same level. It is very flat. When the rotation is rotated, all the small diamonds are neatly exuding the same fire color and light. Five: Jeep inlaid is more popular among men's rings. The diamond ring of this style can be inlaid into the hole where the diamond waist is better wrapped in the diamond waist, and then the surrounding metal is fixed to fix the diamond. The advantage of this style is that it can better protect the diamond waist. If it is inlaid, the diamond will be more stable and beautiful and generous. The disadvantage is that it takes time, and it is easy to cause diamond damage when inlay. Six: The borderless inlay is mainly the inlay of the princess's side diamond. On the surface, the claws and grooves of the metal are not seen. In fact, there are neat grooves below the waist of the princess. The metal claw card is inside, and the requirements for the process are very high. Seven: Card inlaid is also called forced inlaid. The principle uses the tension of metal to fix the waist of the gemstone (sometimes the waist and bottom part). It is a very fashionable inlay style. We love. The disadvantage of this inlaid method is that the gemstone is very limited by the metal and small stress points. Eight: Bringing edges, also known as the edge inlaid, is a process that circles the surroundings around the gemstone with metal edges. It is mostly used for some larger gems, especially the arch of the arch, because a large arched gemstone It is not easy to deduct it with claws, and long claws affect the overall beauty. It is mainly used in color gemstones to better show the color of gemstones. Its main advantage is that it has more secure protection for diamonds, especially for the pavilion and waist of the diamond; the surface of the ring is smoother, and the degree of fixation of diamonds is higher. However, the disadvantage is that there are more metals, cumbersome processing, high cost, and relatively small light to enter the diamond, making the beauty of diamonds be fully reflected. This style is more suitable for older women to wear or inlay of male rings.
One: Rail inlaid is a mosaic method that places the gemstone in the front side of the car, put the gemstone in the position and suppresss firmly. This method is commonly used in high -end jewelry. Other squares and trapezoidal diamonds are inlaid to inlay it with excellent effects. The advantage of this style is that it has better protection on the waist of the diamond. At the same time, it can be inlaid with multiple diamonds and different stripped diamonds at the same time. The disadvantage is that the beauty of diamonds cannot be fully reflected, the cost is high, and diamond damage is likely to cause diamonds. This style is suitable for both male rings and women's rings. Two: This style of inlay is to inlaid the diamond into a string, and the diamond is inlaid in various holes on the ring, so that the diamond and the ring are almost on the same plane, often used for women's finger ring. The advantage of this style is that it can better protect diamonds than claws. In addition, this style makes most of the diamond exposure outside, which can produce a more visual effects that diamonds are actually larger or more. The disadvantage is that the danger of inlaid is high, because diamonds are easily damaged during the inlaid process. The degree of diamond fixation is not as good as the above styles, and the surface of the diamond ring is not as flat as the gap fate and Chaneer. This diamond inlaid process is suitable for diamonds with small scores. Three: Claw inlaid this is the most common and relatively simple process in the inlaid process. Claw inlaid is the method of clawing gemstones on the bracket with metal claws. The claws are divided into two types of single grains and group inlays. The single -granular inlaid is inlaid with a large gemstone on the bracket; In addition, this style of inlaid diamonds are also easy to clean. Because of the above advantages, the diamond ring with claws is favored by women. However, the diamond (especially above the pavilion) exposure is more exposed than other styles, so pay attention to the protection of diamonds when wearing. In addition, this style is sometimes easy to hook clothes, towels or hair, or harm others, and the wearer also needs to pay great attention. Four: Microclangeal is performed under a microscope. It is very rigorous and exquisite for craftsmanship. The process of Dger jewelry: The diamond is very small. The countertop is parallel to the same level. It is very flat. When the rotation is rotated, all the small diamonds are neatly exuding the same fire color and light. Five: Jeep inlaid is more popular among men's rings. The diamond ring of this style can be inlaid into the hole where the diamond waist is better wrapped in the diamond waist, and then the surrounding metal is fixed to fix the diamond. The advantage of this style is that it can better protect the diamond waist. If it is inlaid, the diamond will be more stable and beautiful and generous. The disadvantage is that it takes time, and it is easy to cause diamond damage when inlay. Six: The borderless inlay is mainly the inlay of the princess's side diamond. On the surface, the claws and grooves of the metal are not seen. In fact, there are neat grooves below the waist of the princess. The metal claw card is inside, and the requirements for the process are very high. Seven: Card inlaid is also called forced inlaid. The principle uses the tension of metal to fix the waist of the gemstone (sometimes the waist and bottom part). It is a very fashionable inlay style. We love. The disadvantage of this inlaid method is that the gemstone is very limited by the metal and small stress points. Eight: Bringing edges, also known as the edge inlaid, is a process that circles the surroundings around the gemstone with metal edges. It is mostly used for some larger gems, especially the arch of the arch, because a large arched gemstone It is not easy to deduct it with claws, and long claws affect the overall beauty. It is mainly used in color gemstones to better show the color of gemstones. Its main advantage is that it has more secure protection for diamonds, especially for the pavilion and waist of the diamond; the surface of the ring is smoother, and the degree of fixation of diamonds is higher. However, the disadvantage is that there are more metals, cumbersome processing, high cost, and relatively small light to enter the diamond, making the beauty of diamonds be fully reflected. This style is more suitable for older women to wear or inlay of male rings.