5 thoughts on “Is the clarity and brightness of the diamond?”
Isabel
The clarity and brightness of large diamonds, small diamonds have almost no effect. The clarity level is determined by the number, size, color and location of the wrap or defect in the gemstone. Unless it is a large diamond, the clarity level can have a small impact on the appearance of the diamond. The larger the diamond, the larger the cut surface, and the large cut surface will increase the visibility of the clarity. In the 4C standard of diamonds, the clarity is considered the most unimportant character, because the bright light of the diamond is mainly determined by cutting. The higher the diamond cut level, the more difficult it is to find the parcels. , but there are indeed some ways to cut work will require as high as possible, such as "square" or "emerald green shape" -the diamonds with stairs Method is easier to detect the problem of clarity. Extension information:
The diamond ring level is diamond 4C grade, which includes carats, color, clarity, and cutting. 1, carat is a metering unit of diamond weight, 1 carat = 200 mg = 0.2 grams. As the weight of diamond increases, its value increases geometrically. 2, the color is from the excellent D -class colorless to the general Z -level micro yellow, a total of 23 levels. As the level of the letters, the lower the level, the lower the price. 3, the clarity refers to the internal defects and the amount of internal content. The higher the clarity level, the less defects and internal content. 4. The cutting of the diamond is given a secondary life. The good cut work can fully reflect the brightness and fire color of the diamond. Reference materials Source: Baidu Encyclopedia-King Kong Stone Reference Data Source: Baidu Encyclopedia-Diamond Clear
Diamonds below 20 points can indeed not issue an appraisal certificate, because diamonds below 20 points are broken diamonds, and the
The stone weighs 0.109, color i-j The diamonds are 10.9 points and belong to the broken diamonds, so it is understandable that he does not give you a certificate. The color I-J is still able to pass, but it is already close to yellowing.
Was you said, the brightness and clarity of the diamond are related. This naturally related is that the diamonds with high clarity are indeed brighter when other conditions are unchanged. However, the brightness of diamonds does not exactly depends on the clarity, and it also depends on color and cutting. If the cutting is not good, it is easy to appear without light. Diamonds have 4C standards, weight, color, clarity, and cutting, any of them can affect its value.
For the diamond you bought, my suggestion is this. The diamond you buy is relatively small, more than 10 points, and you don't have to be too blame for the clarity, because the diamond is small, the naked eye is naked, and the naked eye is naked. It is difficult to see the flaws, and the color will not be too obvious. However, the cutting can be picked up with heart, see if it is shiny and firecolor.
According to the state regulations, the specific parameters of the diamond certificate below 20 points may not be marked and color, not no certificate! The price of diamonds in the Northeast can be said to be high in quality. The clarity and fire color (brightness) of diamonds are of course related, but the relationship is not absolute. If you cut well, you can also save a little. The following is the suggestion of a diamond website on a diamond website: (1) The better the clarity of the diamond, the higher the price. When you want to buy a high clarity diamond or invest and collect it, VS level or above is the most suitable. When you have no special requirements for the clarity of diamonds, the choice of SI -level cost performance is the highest, and the naked eye cannot distinguish the SI and VS levels. Moreover, defects are part of the diamond, which is a unique label made by nature for each diamond. (2) Buying a diamond ornament does not necessarily require VS and I levels. Diamonds embedded on the platinum support, the color reaches K color. For diamond ornaments below 0.25CT, especially bracelets, earrings, pendants, etc., do not have to be demanding for colors and clarity. As long as you work well, you can "fire" (referring to the big color of diamonds). If you can look at the following diamond price table, you know the true value of your diamond. This price is said to be discounted! It golden net women's ring price table Clato house color clarity traditional jewelry shop price 5 'pt950 i-j above VS above 1500 1198 6' pt950 I-j above VS or above 1800 1298 7 'PT950 I-J above VS or above 2100 1398 8' PT950 I-J above VS above 2500 1598 9 'PT950 I-J or above 2700 1798 10' PT950 I-J or above 2800 1998 or above 2800 199888 11 'PT950 I-J above VS above 3000 2198 12' PT950 I-J or above 3300 2398 13 'PT950 I-J or above 3600 2498 14' PT950 I-j above 3800 2598 15 'PT950 I-J above VS 4100 2698 16' PT950 I-J or above 4300 2898 17 'PT950 I-J or above 4800 3198 18' PT950 I-j above 53498 n19 'PT950 I-J or above VS above 5500 3598 20' PT950 I-J or above 5800 3998
There is no certificate of diamonds below 20 points, which is international practice, yes.
i level is not pure degree, but color, color D, e, f, g, h, i can all be called "white diamonds", J, K, L ... It's yellow.
The clarity can become "flaws", divided into: if (non -flaw), VVS (extremely difficult to find flaws under 10 times large mirror), VS (10 times the large mirror teaching difficult to find flaws), Si (10 times the teachings of the large mirror is easy to find defects), I (the naked eye can be found in the naked eye)
The brigade and brightness are not large, and the brightness is mainly determined by cutting. The reason why diamonds are so shiny are because the material of itself causes a large refractive index, and the other is because of artificial cutting, so that the light of the diamond is reflected as much as possible instead of shooting through the diamond.
0.109 carat diamonds are very small. But the color I-J is a bit yellow. If the cut is well cut, it can make up for the lack of color.
"Hong Kong Fengti Brand" has never been heard. I wonder how the price you bought? As long as it does not exceed 2500 yuan.
The clarity refers to the "purity" of diamonds. Because diamonds are natural minerals, there may be inner content, cracks, etc., and these natural features affect the appearance of the light through the diamond, which affects the appearance of the diamond. Therefore, the less the diamond contains, the higher the clarity, the more the light refraction, the more brilliant the diamond, and the higher the value will be higher.
The clarity and brightness of large diamonds, small diamonds have almost no effect.
The clarity level is determined by the number, size, color and location of the wrap or defect in the gemstone.
Unless it is a large diamond, the clarity level can have a small impact on the appearance of the diamond. The larger the diamond, the larger the cut surface, and the large cut surface will increase the visibility of the clarity. In the 4C standard of diamonds, the clarity is considered the most unimportant character, because the bright light of the diamond is mainly determined by cutting. The higher the diamond cut level, the more difficult it is to find the parcels.
, but there are indeed some ways to cut work will require as high as possible, such as "square" or "emerald green shape" -the diamonds with stairs Method is easier to detect the problem of clarity.
Extension information:
The diamond ring level is diamond 4C grade, which includes carats, color, clarity, and cutting.
1, carat is a metering unit of diamond weight, 1 carat = 200 mg = 0.2 grams. As the weight of diamond increases, its value increases geometrically.
2, the color is from the excellent D -class colorless to the general Z -level micro yellow, a total of 23 levels. As the level of the letters, the lower the level, the lower the price.
3, the clarity refers to the internal defects and the amount of internal content. The higher the clarity level, the less defects and internal content.
4. The cutting of the diamond is given a secondary life. The good cut work can fully reflect the brightness and fire color of the diamond.
Reference materials Source: Baidu Encyclopedia-King Kong Stone
Reference Data Source: Baidu Encyclopedia-Diamond Clear
Diamonds below 20 points can indeed not issue an appraisal certificate, because diamonds below 20 points are broken diamonds, and the
The stone weighs 0.109, color i-j
The diamonds are 10.9 points and belong to the broken diamonds, so it is understandable that he does not give you a certificate. The color I-J is still able to pass, but it is already close to yellowing.
Was you said, the brightness and clarity of the diamond are related. This naturally related is that the diamonds with high clarity are indeed brighter when other conditions are unchanged. However, the brightness of diamonds does not exactly depends on the clarity, and it also depends on color and cutting. If the cutting is not good, it is easy to appear without light. Diamonds have 4C standards, weight, color, clarity, and cutting, any of them can affect its value.
For the diamond you bought, my suggestion is this. The diamond you buy is relatively small, more than 10 points, and you don't have to be too blame for the clarity, because the diamond is small, the naked eye is naked, and the naked eye is naked. It is difficult to see the flaws, and the color will not be too obvious. However, the cutting can be picked up with heart, see if it is shiny and firecolor.
According to the state regulations, the specific parameters of the diamond certificate below 20 points may not be marked and color, not no certificate! The price of diamonds in the Northeast can be said to be high in quality.
The clarity and fire color (brightness) of diamonds are of course related, but the relationship is not absolute. If you cut well, you can also save a little.
The following is the suggestion of a diamond website on a diamond website:
(1) The better the clarity of the diamond, the higher the price. When you want to buy a high clarity diamond or invest and collect it, VS level or above is the most suitable. When you have no special requirements for the clarity of diamonds, the choice of SI -level cost performance is the highest, and the naked eye cannot distinguish the SI and VS levels. Moreover, defects are part of the diamond, which is a unique label made by nature for each diamond.
(2) Buying a diamond ornament does not necessarily require VS and I levels. Diamonds embedded on the platinum support, the color reaches K color. For diamond ornaments below 0.25CT, especially bracelets, earrings, pendants, etc., do not have to be demanding for colors and clarity. As long as you work well, you can "fire" (referring to the big color of diamonds).
If you can look at the following diamond price table, you know the true value of your diamond. This price is said to be discounted!
It golden net women's ring price table
Clato house color clarity traditional jewelry shop price
5 'pt950 i-j above VS above 1500 1198
6' pt950 I-j above VS or above 1800 1298
7 'PT950 I-J above VS or above 2100 1398
8' PT950 I-J above VS above 2500 1598
9 'PT950 I-J or above 2700 1798
10' PT950 I-J or above 2800 1998 or above 2800 199888
11 'PT950 I-J above VS above 3000 2198
12' PT950 I-J or above 3300 2398
13 'PT950 I-J or above 3600 2498
14' PT950 I-j above 3800 2598
15 'PT950 I-J above VS 4100 2698
16' PT950 I-J or above 4300 2898
17 'PT950 I-J or above 4800 3198
18' PT950 I-j above 53498 n19 'PT950 I-J or above VS above 5500 3598
20' PT950 I-J or above 5800 3998
There is no certificate of diamonds below 20 points, which is international practice, yes.
i level is not pure degree, but color, color D, e, f, g, h, i can all be called "white diamonds", J, K, L ... It's yellow.
The clarity can become "flaws", divided into: if (non -flaw), VVS (extremely difficult to find flaws under 10 times large mirror), VS (10 times the large mirror teaching difficult to find flaws), Si (10 times the teachings of the large mirror is easy to find defects), I (the naked eye can be found in the naked eye)
The brigade and brightness are not large, and the brightness is mainly determined by cutting. The reason why diamonds are so shiny are because the material of itself causes a large refractive index, and the other is because of artificial cutting, so that the light of the diamond is reflected as much as possible instead of shooting through the diamond.
0.109 carat diamonds are very small. But the color I-J is a bit yellow. If the cut is well cut, it can make up for the lack of color.
"Hong Kong Fengti Brand" has never been heard. I wonder how the price you bought? As long as it does not exceed 2500 yuan.
The clarity refers to the "purity" of diamonds. Because diamonds are natural minerals, there may be inner content, cracks, etc., and these natural features affect the appearance of the light through the diamond, which affects the appearance of the diamond. Therefore, the less the diamond contains, the higher the clarity, the more the light refraction, the more brilliant the diamond, and the higher the value will be higher.